Scan to BIM and point cloud to BIM AI.
Postlight converts terrestrial laser scanning and LiDAR captures into editable IFC4 and Revit models. Our scan to BIM workflow clears clutter, extracts structural and architectural elements, and verifies the model against the raw point cloud.
Contact: founders@postlight.ai
Point cloud to BIM AI from laser scanning to editable geometry.
Existing buildings, commercial retrofits and active renovations rarely match their original 2D drawings. A terrestrial laser scanner or mobile LiDAR walk captures millions of 3D points in hours, yet manually tracing that raw point cloud into a clean Revit or IFC4 model still takes teams weeks. Postlight applies point cloud to BIM AI so owners, engineers and contractors start from an editable model that matches the walls as built.
Inside our scan to BIM workflow.
Every laser scan passes through five verified stages from field capture to openBIM delivery, keeping full traceability between the raw 3D point cloud and each generated building element.
- Laser scanning and LiDAR. Capture the existing building with a terrestrial laser scanner for high-density accuracy or mobile LiDAR for rapid floor coverage, or send existing registered E57, LAS, LAZ or RCP point clouds you already hold.
- Clutter and noise removal. Real buildings contain furniture, shelving, temporary partitions, scaffolding, equipment and stray reflections. Point cloud to BIM AI segments and strips transient clutter before fitting permanent architecture and structure.
- Wall, slab and opening extraction. Permanent building planes and openings are extracted as parametric walls, floor slabs, columns, beams, doors and windows with true thicknesses, heights and alignments rather than heavy polygon meshes.
- Editable IFC4 and Revit delivery. The reconstructed geometry exports as clean openBIM IFC4 ready to open in Revit, Navisworks and ArchiCAD, organized by level and element class so design and construction teams can edit it immediately.
- Verification against the point cloud. Every generated wall, slab and opening is checked back against the registered point cloud so out-of-plumb surfaces, floor level shifts and structural offsets are visible before retrofit design or prefabrication begins.
Built for retrofits, maintenance and live construction.
An accurate as-built BIM model unlocks every downstream phase of a building. Once the scan to BIM model is verified, teams use it for architectural redevelopment, MEP coordination or continuous site tracking.
Retrofits and redevelopment. Give architects and structural engineers an editable baseline of existing slabs, columns and core walls so tie-ins, core cuts and prefabricated assemblies fit the first time on site.
Facility maintenance and handover. Replace stacks of outdated PDFs with a structured IFC4 model of existing assets, rooms and mechanical spaces that operations teams can query and keep current.
Live construction and coordination. Bring the verified scan to BIM model straight into daily construction progress tracking or multi-discipline clash coordination so existing structure stays synchronized with new work.
Continue with our construction digital twin and BIM progress tracking
Scan to BIM questions from owners, contractors and BIM teams.
A raw point cloud is a measurement, not a usable BIM. Below are the practical questions teams ask about laser scanning to BIM inputs, clutter handling, Revit compatibility and verification.
Which point cloud formats work?
We accept registered point clouds from terrestrial laser scanners and mobile LiDAR systems in E57, LAS, LAZ and RCP formats. If you have not scanned the building yet, we can advise on scan density and capture planning or bring capture equipment directly to your site.
How is clutter removed from scans?
Occupied offices, plant rooms and active renovation floors are full of desks, ducts, pallets, tools and moving people. Our pipeline separates transient objects and stray laser reflections from permanent walls, slabs, columns and openings so manual cleanup does not bottleneck delivery.
Is the output editable in Revit?
Yes. We deliver structured IFC4 building elements rather than uneditable surface meshes. Walls, slabs, columns and openings carry level assignments and clean parametric dimensions so your architects and BIM managers can link or edit the model directly in Revit, Navisworks or ArchiCAD.
How is model accuracy verified?
Every modeled element is validated directly against the registered laser scan point cloud. Where an older structure has out-of-plumb walls, uneven floor slabs or unexpected beam depths, those deviations are documented against the cloud so your design team sees reality rather than an idealized drawing.
What level of detail is modelled?
We model architectural and structural geometry to the level of detail your retrofit or operations workflow requires, typically LOD 200 to LOD 300 for walls, floor slabs, soffits, columns, beams, doors and window openings, plus visible primary MEP risers where captured cleanly in the laser scan. Scope and tolerances are confirmed on a sample floor before full-building conversion.
Can this feed daily site tracking?
Yes. Many renovation and redevelopment projects start with scan to BIM to establish the existing baseline, then connect that same IFC4 model to Postlight's construction digital twin so headsets, drones and robots track new work against both existing structure and new design every day.
Who owns the scans and the BIM?
You keep ownership of both the raw point cloud and the resulting BIM deliverables under your project contract. Faces or bystanders captured during LiDAR walks are blurred, and project files are accessible only to the roles your project authorizes.
Start with one building or floor.
Tell us about an existing building or retrofit that needs a reliable BIM. Share the approximate floor area and whether you already have E57 or LAS laser scans, and we will walk through our scan to BIM workflow on one floor first. Write to founders@postlight.ai.